Descon Power Solutions is the biggest operation and maintenance service providers for all kind of power plants. Site Electrical Engineer at 50 MW Power Plan, MPCL: July2017-Present • Annual maintenance: Supervised the maintenance tasks on GSU, RMU and Switchyard in a minimum downtime, causing maximum generation availability and generated SOPs of all activities with team for proper documentation under ISO standards. • International Standards for Engineering: Also worked for the reporting and documentation as per International Standards involved in Installation, Commissioning, Operation and Maintenance Tests like IEEE/IEC/NEMA/ANSI/ITU involved. • Drawing Studies: Learned the proper utilization of Electrical Drawings of Switchgear-RCP Panel, Transformer Control and Auxiliary supply panels, DC Chargers etc. for troubleshooting of faults, termination and interpretations • Engineering Software: Worked on Pc-Vue, Milestone XProtect, SMP Gateways, ETAP, Cadence Virtuoso, Cisco Packet Tracer, IED Interfacing Softwares and Autocad. • SOP Creations: Created the SOPs regarding Grid Isolation, Failure, Restoration, and Switchgear Operations • AUTOMATION: Excelled the skills in troubleshooting SCADA-Connexium Switches, SMP Gateways, S7 PLC, Hardwiring control and signal terminations, Pc-Vue Supervisor and Windows Servers • CMMS: Played an important part in implementation and development of Management System for PM, JOB Requests, Inventory Creation and History of Maintenance in Oracle Based software developed by ESBI used at ROUSCH Power Plant. • Achievements: Successfully filled the gap of supplier dependability by developing skills of the team in CCTV and Fire Alarm Systems. • IMS Implementation: Worked for the implementation of IMS-controlling and maintaining all technical operation, maintenance, and HSE and Administration documents. • SGS Certification: Helped in achieving the top ranked certified Site among other Wind Power plants

Chemical products like HCL, Chlorine gas etc with Wartsila 30MW power plant and Grid Station.

Trainee Engineer at 132 KV Grid Station: Dec2016-July2017

• Operation & Maintenance: Planned maintenance tasks for the following

 Power Transformers: Daily inspection of Parameters like temperature, silica gel conditions, OLTC, Cooling Systems, Secondary and primary terminations checks and troubleshooting.
 Auxiliary Transformers: Routine Maintenance of Auxiliary Transformers like Oil Chemical Analysis
and BDV Tests, Buchholz Relay inspections and verifications, Leaks and Damages.
 Instrument Transformers: Oil checks, visual and physical inspections and Terminations.
 Power Cables: Inspections and HV Cable Joints in case of Corrective Maintenance

 SF6 Breakers: Alstom make Breaker’s SF6 Gas Pressure checking and fillings, Supply and Control Cabinet Inspections, Interlocking and Troubleshooting

 Grounding system: Earth testing for Grid Station Mesh Safety Precautions.

 11 KV Switchgears: VCB mechanical interlocking, cleaning and operational checks, LT compartment termination checking, Earth fault over current relay testing and drawing studies for ensuring connections and fault detections.

• Switchgear Installation & Commissioning: Managed the installation of 20 Siemens manufactured 11KV panels at Grid and Sub-Stations with a team of Electricians, Fitters, Supervisors and Trainees of Electrical and Mechanical Department of ICL.
• Power Transformer Installation & Commissioning: Worked with Technicians for the Drawing Studies of 20MVA PEL Manufactured Power Transformer for the Complete Power and Control Terminations Including, Relay and Control Panels, Tap Changer, Fan and Cooling System Power and Control Cabinets.

• Root Cause Analysis & Reporting: Learned the root cause analysis techniques for future safeties and problem avoiding under the skilled specialists of Electrical Department. Also, Excelled in reporting of daily load regulations, Daily goal plans

Perfect Electro-Mek Pakistan is a rising private based switchgear manufacturing company

Trainee Engineer: June 2016-November2016

• Project Supervision: Supervised the correct panel assembling of various WAPDA, MEPCO and Other customers by electricians and bus bar fitters according to provided drawings of design department.

• Switchgear Assembling: Coordinated with fabrication, paint and mechanical department for required sheets, coatings and fittings for panel constructions and learned their techniques of making use of various machines like CNC machines, bending machines, electric drills and cutters etc.

• Testing: Learned the following tests for switchgear manufacturing and commissioning

 CT Tests Current injection tests and insulation tests by Multi-Amp Relay tester and Kyoritsu tester.
 High pot tests High potential test at the manufacturing side for ensuring safe leakage current limits.
 Cable insulation tests tests for HT, XLPE Cables and basic terminations of power cables.

 Relay testing setting the relay parameters of over current & earth fault by single phase Multi-Amp Tester.
 Bus Bar Insulation and contact resistance test Bus bar Contact Resistance Test by Kyoritsu insulation tester.

 IEC/ANSI Standards and thermograph test

• Job Planning: Planned the time, work force and bill of quantities for ongoing and upcoming projects

*Worked with the switching and transmission monitoring team-downlinks reporting and identifying
*How the company's engineering section is running complete and in depth understandings
*MSAG's, cards and Softwares of Alcatel, Huawei and Siemens
*MDF knowledge and workings

*Hydro-Electric electricity generation-power house and switch yard operations
*Governor systems and shafts, tubes and other mechanical engineering knowledge behind Dams
*AVR, Switch yard, Auxiliary operations, Power house controls, Instrumentation sections